Keyboard & mouse
Every shortcut and mouse gesture in Starlight, area by area. The command palette (/) also shows the key of each action.
Each row shows the Mac key first, then the Windows key after the slash. Letter keys, digits, arrows, Space, Esc and / are the same on both. For the menu bar and the right-click menus, see Menus. Words such as comp, keyframe and ease are explained in the Glossary.
Where a key goes
The same key can do different things. It depends on where the pointer is and what has focus.
- You are typing in a field
- Letter keys type text. The shortcuts for the palette, compose, Find, export, open, reload, new project, Settings, save, the next and previous scene, and the Claude panel still work.
- On a Mac these shortcuts use ⌘ only. A ⌃ key keeps its text job in a field. For example, ⌃K deletes to the end of the line, and it does not open the command palette.
- Some fields keep almost every key: a marker's name, a Claude tab's name, a comp's name on the node graph, and a sticky note. Only these keys still work there: ⌃` / Ctrl+`, ⌘K / Ctrl+K, ⌘/ / Ctrl+/, ⌘S / Ctrl+S, ⌥⌘S / Ctrl+Alt+S, ⌘PageDown / Ctrl+PageDown and ⌘PageUp / Ctrl+PageUp. Press ⏎ / Enter or Esc to leave them.
- ⌘Z / Ctrl+Z undoes your typing. ⌘S / Ctrl+S saves from a field too: Starlight takes the value you typed first (as ⏎ / Enter would), then saves. This is also true in the scene and comp rename bars. ⌘PageDown / Ctrl+PageDown and ⌘PageUp / Ctrl+PageUp take the value first too.
- Only a field that you type text in counts. A checkbox, a slider, a colour well or a button is not a text field: after you click one, Space, g and Delete still work. A slider keeps the arrow keys, Home, End, PageUp and PageDown. A dropdown list keeps its keys while it has focus.
- Focus is inside a panel
- The panels are Properties, Assets, Generations, Glimpse and Claude. In a panel, a key pressed alone (with no ⌘ / Ctrl) acts only in that panel. Shortcuts with ⌘ / Ctrl still work.
- Two kinds of single keys still go to Starlight from a panel: Space (play or pause) and the panel keys (⇧T, ⇧P, ⇧A, ⇧G, ⇧R, ⇧S). They stay in the panel while you type in a text field. Space on a button plays or pauses. It does not also press the button.
- In Glimpse, the walk keys stay in Glimpse while you walk: W A S D Q E and the arrows, also with ⇧ / Shift (it walks faster). So ⇧A and ⇧S walk there, and do not open a panel. Glimpse does not use Space, so Space plays or pauses there too.
- Esc closes the panel, but not while you are in a text field.
- The pointer is over the timeline
- The timeline's own keys come first: ⌥[, ⌥], s, d, n, [, ], +, −, 0, \, the arrows, ⌘C, ⌘V, ⌘D and Esc. Away from the timeline, these keys do their normal job.
- One exception: keyframes that you selected in the timeline. ← / →, ⌫ / Backspace and Esc act on them wherever the pointer is.
- The pointer is over the canvas or the node graph
- The arrow keys and ⇧1 / Shift+1 act on the area the pointer was over last: the canvas or the node graph.
- Over the canvas, the arrow keys move the selected layer or surface. Over the graph, or with a comp or clock selected, they move from node to node. With nothing selected, ← / → step one frame. ⇧1 / Shift+1 fits the area.
- Something is open on top
- The palette, a sheet, Settings, the Projects screen or a generation preview gets the keys first. Esc closes it.
- In a dialog, ⌃` / Ctrl+`, ⌘K / Ctrl+K and ⌘/ / Ctrl+/ still work. They close the dialog first, as Esc does. Then they go to Claude, or open the command palette. A question that waits for your answer keeps these keys until you answer it. While a dialog is open, Edit › Undo, Edit › Redo and Scene › Next Scene / Previous Scene do not change the scene behind it. In a text field of the dialog, ⌘Z / Ctrl+Z still undoes your typing.
- In the help, Esc closes the help. ⌃`, ⌘K, ⌘/, ⌘S and ⌘PageDown / ⌘PageUp (with Ctrl on Windows) work in the help too. ⌘Z / Ctrl+Z in the help's search box undoes your typing, not a scene edit.
- The Stage panel, like every panel, keeps the keys you press inside it. Click inside it to give it the keys, and click the canvas to take them back. In the Stage panel, Esc goes back one step at a time, then closes the panel. A text field in it keeps its own keys.
- The Claude terminal
- Your typing stays there: letters, Space, the arrows, Delete, Esc, and on a Mac every ⌃ + letter.
- On a Mac every ⌘ shortcut still works, except ⌘C, ⌘V, ⌘X and ⌘A: they copy, paste, cut and select in the terminal.
- On Windows, Ctrl+K, Ctrl+/, Ctrl+,, Ctrl+S, Ctrl+PageDown, Ctrl+PageUp and F11 still work. Every other Ctrl + letter goes to Claude.
- ⌃` / Ctrl+` closes the panel, and ⇧Esc / Shift+Esc gives the keys back to the canvas (Keys in the terminal).
- A sticky note
- Every other key stays in the note, ⌘Z / Ctrl+Z too. Esc or ⌘⏎ / Ctrl+Enter leaves the note.
File, save and export
Keys for projects, saving, export and Settings. See Projects, Save and Export.
| ⇧⌘N / Ctrl+Shift+N | Make a new project |
| ⌘O / Ctrl+O | Open a project. On a Mac, pick its folder or its project.yaml. On Windows, pick its folder |
| ↑ / ↓ on the Projects screen | Move through your projects. ⏎ / Enter opens one. Esc closes the screen, when a project is open. ⇧⌘N and ⌘O work here too |
| ⌘R / Ctrl+R | Reload the project from disk (File › Reload Project from Disk). If any scene has unsaved edits, it asks first and keeps them as recovery drafts |
| ⇧⌘R / Ctrl+Shift+R | Force-reload the whole app (Help › Troubleshooting › Force Reload App). It asks first, and keeps unsaved edits as a recovery draft |
| ⌘S / Ctrl+S | Save the open scene and where the surfaces sit on your canvas. It also makes a version (a snapshot you can go back to). Works from anywhere: a text field, a list, the palette, the Claude terminal |
| ⌥⌘S / Ctrl+Alt+S | Save All: every scene with unsaved changes (File › Save All). Each scene is its own version |
| ⌘E / Ctrl+E | Open the export sheet for this scene |
| ⏎ / Enter in the export sheet | Start the export (⌘E / Ctrl+E again does the same). Esc closes the sheet |
| ⇧⌘E / Ctrl+Shift+E | Export the reel: every scene in order, one file per surface, with the export sheet's last settings |
| Esc while exporting | First closes what is open and clears the selection. With nothing else open, it asks: Cancel the export? The finished surfaces are kept. Click Cancel Export to stop, or Keep Exporting |
| ⌘, / Ctrl+, | Open Settings. Press it again, or Esc, to close it |
| ? | Open this help (not while you type in a field). Esc, ✕ or a click outside closes it |
| ⌘Q (Mac) | Quit Starlight. With unsaved changes, it asks Save changes? first (Save changes before you leave) |
| ⌘H / ⌥⌘H (Mac) | Hide Starlight / hide the other apps |
| ⌘M / Ctrl+M | Minimize the window (Window menu) |
| Ctrl+W (Windows) | Close the window (Window menu). This quits Starlight. With unsaved changes, it asks Save changes? first |
Edit and select
Keys that change the selected layers. They work on the canvas, in the node graph and in the timeline.
| ⌘Z / Ctrl+Z | Undo the last change to the scene (Undo and redo). In a text field, it undoes your typing |
| ⇧⌘Z / Ctrl+Shift+Z | Redo the last change you undid. On Windows, Ctrl+Y (Edit › Redo) does the same |
| ⌫ / Backspace | Delete the selected layers, or the selected effect. Delete works too. If keyframes are selected in the timeline, it deletes the keyframes. A layer locked in the timeline is kept (Hide, solo or lock a layer) |
| b | Bypass the selected layers: switch off what each one adds. A picture, shape, text or video hides. A transform or group keeps showing its layers, which keep playing, without its own position, animation and effects. On a selected effect, bypass only that effect. On a comp's root, bypass the whole comp |
| ⌥B / Alt+B | A/B on the selected layers: show a clip's original or its version, or show a layer live or from its pre-render. Press it again to switch back. Only the view changes: the scene does not change, and nothing is saved |
| ⌘] / Ctrl+] | Bring the layer forward one step |
| ⌘[ / Ctrl+[ | Send the layer backward one step |
| ⇧⌘] / Ctrl+Shift+] | Bring the layer to the front |
| ⇧⌘[ / Ctrl+Shift+[ | Send the layer to the back |
| ⇧M / Shift+M | Draw a mask on the selected layer with the pen (Pen and paths) |
| ⌘C / ⌘V / ⌘D | Copy, paste and duplicate layers: only with the pointer over the timeline (Timeline keys). In a text field, copy and paste text |
| ⌘F / Ctrl+F | Find a node at any graph level and jump to it. Press it again to close Find. Over Properties, it filters the fields instead. In the scene list, it goes back to the list's search field and selects its text |
| Type in Find | Find matches the name and the path of each node. It shows up to 60 matches |
| ↑ / ↓, ⏎ / Enter in Find | Pick a match, then jump to it. The graph goes into the comp that holds it. Esc, or a click outside, closes Find |
| Esc | Close the top thing that is open: this help, Find, the scene list, the versions list, then the timeline. With nothing open, clear the selection. If you went inside a comp with a double-click on the canvas, Esc also takes you back out. While exporting, and only when none of this is left to do: ask to cancel the export |
Playback
Keys that play and step through time. See Transport & playback.
| Space | Play or pause. With a work area set, only that part plays |
| ⇧Space / Shift+Space · keypad 0 | Cache the work area (the whole loop without one), then play it in real time from memory (RAM preview). Press again to stop caching |
| , / . | Step one frame back / forward, whatever is selected. Add ⇧ / Shift for 10 frames |
| ← / → | Step one frame when nothing is selected, or when the pointer is on a clock dial. With no node selected and the pointer over the canvas or the node graph, they step also when keyframes are selected in the timeline. Add ⇧ / Shift for 10 frames |
| j / k | Go to the previous / next keyframe: of the selected layer, or of the whole scene. The playhead stops at the first and the last keyframe (Go to the previous or next keyframe) |
| Home / End | Go to the first / last frame of the loop. Audio and video go there too. On a Mac laptop, use fn + ← / → |
| ⇧F / Shift+F | Go to the first frame, and keep playing or stay paused. It works with the pointer over the canvas, the graph or the timeline |
| i / o | Set the start / end of the work area (the part that loops) at the playhead. They work anywhere, but not while you type in a field or work in a dialog. Click × on the loop chip to clear it |
| Click ▶ or ⏸ at the bottom left of the canvas | Play (▶, shown while paused) or pause (⏸, shown while playing) |
| Right-click the scene dial, ▶ or the time | The transport buttons: play, frame steps, keyframe and marker jumps, the work area (Use the clock dials) |
| Click the time at the bottom left of the canvas | Show time in seconds or in frames |
| Scroll over a clock | Step one frame for each click of the mouse wheel. Add ⇧ / Shift for 10 frames. A clock is ▶ or the time at the bottom left of the canvas, the time in the timeline's header, or a dial in the node graph (Scrub to a time) |
Panels, view and window
Keys that show and hide panels and change the view. See The workspace.
| g | Show or hide the node graph |
| ⇧T / Shift+T | Show or hide the timeline, in the view you used last |
| ⌥T / Alt+T | Switch the timeline between its layers view and curves view |
| ⇧P / Shift+P | Show or hide Properties |
| ⇧A / Shift+A | Show or hide Assets |
| ⇧G / Shift+G | Show or hide Generations |
| ⇧R / Shift+R | Show or hide Glimpse |
| ⇧S / Shift+S | Show or hide the Stage panel |
| ⌃` / Ctrl+` | Go to the Claude panel from anywhere (open it, or put the keys in its prompt). From its terminal, close it |
| ` | Make the panel you work in fill the window. Press it again to put the layout back. Not while you type in a field (Make a panel fill the window) |
| ⇧I / Shift+I | Show or hide the frame-rate display (the FPS HUD). The bare i sets the start of the work area |
| v | Toggle the viewer: the surfaces the selection feeds show the result of the selected nodes, in a thin grey frame. The viewer button at the top right of the graph does the same |
| f | Focus: show and draw only the surfaces the selection feeds. Press it again to see every surface |
| s | Open the scene list. In the open list, s types in its search field: press Esc to close the list. Over the timeline, s splits a layer instead |
| ⌘PageUp / Ctrl+PageUp, ⌘PageDown / Ctrl+PageDown | Go to the previous / next scene, from anywhere (Scene › Previous Scene, Next Scene). [ and ] alone set the timeline's work area, and only over the timeline |
| ⇧⌘ / Ctrl+Shift + an arrow | Dock the node graph to the left, right, top or bottom edge. A hidden graph shows again |
| ⌃⌘F / F11 | Full screen on or off (View › Enter Full Screen on a Mac, View › Full Screen on Windows) |
| Drag the divider | Change how much space the canvas and the node graph get |
| Drag the grip on the divider | Move the node graph to another edge. Esc cancels |
| Drag a panel's ⠿ grip or name | Dock, stack, pin or float the panel, or drop it on another title row to make tabs (Float, dock and pin). Esc cancels |
| ⌃Tab / Ctrl+Tab, ⌃⇧Tab / Ctrl+Shift+Tab | In a group of tabs: show the next or the previous tab (Put panels together as tabs) |
| Drag the edge or corner of a floating or pinned panel | Resize the panel |
| Drag a rail's inner line, or the line between two stacked panels | Resize the rail, or share the space between the two panels |
| Drag the empty strip at the top | Move the window. Double-click it to zoom (Mac) or maximize (Windows) |
| Alt or F10 (Windows) | Go to the menu bar. Alt + a letter opens a menu (On Windows) |
Palette and compose
Keys for the command palette and ⌘K compose. See The command palette and Compose a change with Claude.
| / | Open the command palette. Not while you type in a field, and not in the Claude terminal (there it goes to Claude) |
| ⌘/ / Ctrl+/, ⌘K / Ctrl+K | Open or close the command palette, from anywhere: also from a text field and the Claude terminal. The two keys do the same thing |
| ↑ / ↓ in the palette | Move up and down the list. With nothing typed: through the recent rows, then the tiles, one row of tiles at a time |
| ↑ at the top of an empty palette | Bring back the words you sent before. ↑ again for older words, ↓ for newer words |
| ← / → in the palette | Move between the tiles. In a list, they move the cursor in the text |
| ⏎ / Enter in the palette | Run the selected row: a command, a tile (it lists its group), or ask Claude. A command that needs text (text, clock, save layout…) asks for it, then ⏎ / Enter creates. Type /gen to open the New Generation form instead |
| ⌘⏎ / Ctrl+Enter in the palette | Send your words to the Claude tab in front, whatever row is selected |
| ⇧⌘⏎ / Ctrl+Shift+Enter in the palette | Open a new Claude tab and send your words there |
| ⌫ / Backspace in an empty palette | Leave a group: back to all the tiles |
| Point at a row, click it | Pick the row, then run it |
| Esc in the palette | Close the palette. While it asks for text, Esc goes back to the list |
| Click outside the palette | Close the palette |
| On the openrouter planner | ⏎ / Enter on plan with OpenRouter: … plans the change. The plan runs at once only if all its generations cost $0. Otherwise it waits until you click approve. With no key, the palette shows a button that opens Settings › Keys |
Fields, lists and dialogs
Keys for small text fields, drop-down lists and dialogs everywhere in the app.
| ⏎ / Enter in a name field | Keep the new name: a scene, an asset, a folder, a marker, a version, a Claude tab |
| Esc in a name field | Cancel and keep the old name. A click away keeps a marker's or a tab's new name, and cancels a scene's |
| ⏎ / Enter in a Settings text field | Save the value. Esc puts back the saved value. In an API key field, Esc cancels the entry. In the media cache and folder fields, Esc closes Settings |
| ⏎ / Enter, ↓ or ↑ on a drop-down list | Open the list. Space does not open it: outside a panel it stays play / pause, and in a panel it does nothing |
| Type in an open list | A long list (more than 20 rows) has a search field: type to filter it. In a short list, typing jumps to a match, and Space picks the row |
| ↑ / ↓, Page Up / Down, Home / End in an open list | Move through the rows |
| ⏎ / Enter in an open list | Pick the row. Esc closes the list. Tab closes it and moves on |
| ⏎ / Enter in the New Project name | Make the project. Esc closes the sheet |
| Esc on a right-click menu | Close the menu (a click outside it does too). The menu has no arrow keys: click an item |
| Middle-drag a number field | The value ladder: drag up / down to pick the step, sideways to change the value. Esc puts the value back (Edit a value) |
Canvas
Mouse and keys on the canvas, where you see your surfaces. See Canvas.
| Click | Select the layer under the pointer, at the node graph's current level. If a ✥ transform places the layer, the click selects that transform. At the top level, a click on a surface that shows a comp selects the comp |
| Double-click a comp | Go inside the comp: select the transform of the layer under the pointer, and step the node graph into the comp. Inside, double-click a comp layer to go one level deeper (Select a layer) |
| Click another surface, or Esc | After a double-click into a comp: go back to the top level |
| Click empty canvas | Clear the selection, and go back out of a comp you went into with a double-click. With ⇧, ⌘, ⌃ or ⌥ (Shift, Ctrl, Alt) held, the selection stays |
| ⇧ / Shift-click, ⌘ / Ctrl-click or ⌥ / Alt-click | Add the layer to the selection, or take it out |
| ⌃ / Ctrl-click | Add or remove the layer too. On a Mac it never opens the right-click menu |
| Right-click | Open the menu for the layer, the surface or the empty canvas under the pointer (Menus) |
| Right-drag, or a two-finger click-and-drag on a Mac trackpad | Draw a box. Let go to select every layer it touches, at the node graph's current level. ⇧ / Shift, ⌘ / Ctrl or ⌥ / Alt adds them to the selection (Select several layers) |
| Drag the selected layer | Move it. Its centre snaps to the centre of its surface and of the other layers. If you picked the content in the graph, the drag selects and moves its transform. A layer locked in the timeline never moves |
| Drag a layer that is not selected | Move its surface, not the layer. Click the layer first to select it |
| Drag a corner or edge handle | Scale the layer |
| ⇧ / Shift while scaling | Keep the proportions |
| ⌥ / Alt while scaling | Scale from the centre |
| Drag the rotate knob | Turn the layer |
| Drag the ringed crosshair | Move the pivot (the point it turns and scales around) without moving the layer |
| Drag an animated layer | Set a keyframe at the playhead for each animated property you change. The other keyframes stay. If keyframes of that property are selected in the timeline, move those keyframes instead (Change an animated layer) |
| ⌘ (Mac) / Ctrl (Windows) while dragging a layer | Turn the centre snap off and snap the layer's edges instead: to its surface's edges, its surface's guides, and the layers beside it (Snap with ⌘ / Ctrl). Press or let go of the key during the drag |
| ⌥R (Mac) / Alt+R (Windows) | Show or hide the rulers. Drag from a ruler to make a guide (Rulers and guides) |
| ⌘; (Mac) / Ctrl+; (Windows) | Show or hide the guides. Hidden guides do not snap |
| Drag a guide · double-click a guide | Move it (drop it on a ruler to delete it) · type its position |
| ⇧ / Shift-drag | Move only across or only up and down: for a layer, its pivot or a surface. Press or let go of the key during the drag to switch |
| Click a surface's name tag | Select the surface |
| Drag a surface, or its name tag | Move the surface on your canvas. It snaps to the edges, centres and gaps of the other surfaces. You can drag a selected surface from up to 8 px outside its edge |
| ⌘ (Mac) / Ctrl (Windows) while dragging a surface | No snapping. The surface goes exactly where you drag it |
| Drag empty canvas | Pan (move the view) |
| Middle-button drag | Pan, anywhere: also over a surface or a layer. It never selects, moves or opens anything |
| Scroll, or pinch on a trackpad | Zoom in or out around the pointer. ⌘ / Ctrl-scroll zooms too. A pinch and Ctrl-scroll zoom faster |
| ⇧ / Shift-scroll | Pan. With a mouse wheel it pans sideways; on a trackpad it pans every way. A sideways swipe also pans sideways |
| ⇧1 / Shift+1 | Fit every surface in the view. While focus is on, fit the surfaces that show. Over the node graph, it fits the graph |
| The fit button, bottom right | Fit every surface in the view, like ⇧1 / Shift+1 |
| 1 | Actual size: show the canvas at 100% (View › Actual Size) |
| + / − | Zoom in / out (= and _ work too). Over the timeline, they zoom time |
| ← → ↑ ↓ | Move the selected layer or surface 1 px, when the canvas is the last place that you clicked. A layer locked in the timeline does not move. With a comp or clock selected, the arrows move through the graph instead |
| ⇧ / Shift + an arrow | Move the selection 10 px |
| ⌥ / Alt + an arrow | Move the selection 0.1 px. With ⇧ / Shift held too, ⌥ / Alt wins |
| An arrow on an animated layer | Set a keyframe at the playhead. If keyframes of x or y are selected in the timeline, move those keyframes instead: select them all to move the whole animation |
| Double-click a path | Edit its points (Pen and paths). The path must be at the node graph's current level |
| Drop an image file, or an image tile from Assets | Place it on the surface you drop it on (Drop media on a surface). On empty canvas, it goes to the centre of the scene's first comp. When the graph is inside a comp, it goes into that comp |
| Drop a video or audio tile from Assets | A video tile makes a video layer. An audio tile makes an audio node, with sound and no picture |
| Drop a video, audio or font file | Import it into Assets only |
- ⌘Z / Ctrl+Z puts a moved surface back. One drag, or arrow presses in a row, is one undo step (Arrange the surfaces).
- Surfaces hidden by focus do not take clicks, do not snap and do not move with the arrows.
Pen and paths
Keys for drawing a path with the pen, and for editing its points. See Draw a path or a mask.
| /, then pen | Start the pen to draw a new path |
| ⇧M / Shift+M | Start the pen to draw a mask for the selected layer |
| Start the pen over a surface | You draw on that surface |
| Click | Place a corner point. If the pen started over empty canvas, the first click on a surface picks the surface. A first click on empty canvas does nothing |
| Drag | Place a smooth point and pull out its handles. ⇧ / Shift keeps the handle straight across or up and down |
| ⇧ / Shift-click | Place the point in a straight line (across or up and down) from the last one |
| Click the first point | Close the path and finish. The path needs at least 3 points |
| ⏎ / Enter while drawing | Finish an open path. With fewer than 2 points, it cancels the path |
| ⌫ / Backspace while drawing | Remove the last point (Delete works too). Removing the only point cancels the path |
| Esc while drawing | Cancel the path |
| Scroll while drawing | Zoom, as usual. A drag does not pan. A middle-button drag pans |
| View keys while drawing | While you draw or edit a path, the view keys do nothing: f (focus), ⇧1 / Shift+1 (fit), 1, +, −, v and ⇧I / Shift+I. Space does nothing too. Finish the path (⏎ / Enter) or cancel it (Esc) first |
| Drag a point or a handle | Move it, while you edit a path. ⇧ / Shift keeps it in a straight line |
| Drag the pill on a handle's stem | Turn and scale both handles together |
| Click a segment | Add a point there. Press and drag to add a point and move it |
| ⌥ / Alt-click a point | Remove the point (⌘ / Ctrl-click works too, and ⌃-click on a Mac). A path keeps at least 2 points |
| ⌫ / Backspace while editing | Remove the point under the pointer |
| Double-click a point | Switch it between corner and smooth |
| Double-click a handle | Line up the other handle with it (a smooth point) |
| Drag the feather knob | Soften the edge of a mask path. Esc during the drag puts it back |
| The arrows while editing | Move the whole path layer, not one point |
| Esc or ⏎ / Enter while editing | Stop editing the path. A click away from the path does the same. Esc during a point or handle drag stops editing and keeps the move |
Node graph
Mouse and keys in the node graph, where each layer is a node. See Node graph and Gesture reference.
| Click | Select a node |
| Click empty graph | Clear the selection |
| ⇧ / Shift-click, ⌘ / Ctrl-click or ⌥ / Alt-click | Add the node to the selection, or take it out |
| ⌃ / Ctrl-click | Add or remove the node too. On a Mac it never opens the right-click menu |
| Right-drag | Drag a box to select every node it touches. You can start on a node too. ⇧ / Shift adds them |
| Right-click a node | Open the node menu, with colour swatches. On a node in the selection, it acts on the whole selection (Menus). An effect chip has its own effect menu |
| Right-click empty graph | Create a layer, add a note, fit the graph, reset its layout or hide the graph (Menus) |
| Drag a node | Move the node in the graph. If it is in the selection, the whole selection moves |
| Drag a dial's name | Move a clock, audio or video dial. A drag on the rest of the dial moves through time |
| Drag the handle beside the scene clock's name | Make the scene clock bigger or smaller. Double-click the handle for the normal size (Make the scene clock bigger) |
| ⌥ / Alt-drag a node | Move the layer into a transform, group or surface. Inside a comp, the comp's own node is a target too. A matte node cuts one layer to the shape of another. Drop on its top half to make the layer the content. Drop on its bottom half to make it the matte |
| ⌥ / Alt-drag an effect chip | Move the layer that has the effect |
| Drag a comp's output dot | Let go on a surface: the comp now shows on that surface (it feeds the surface) |
| ⌥ / Alt-drag a comp | Feed a surface too |
| Drag a feed wire, or a surface's input dot | Feed another surface. Let go anywhere that is not a surface to remove the feed |
| Click a feed wire | Select the wire. ⌫ / Backspace or Delete removes the feed. Esc deselects it |
| Drag empty graph | Pan (move the view) |
| Middle-button drag | Pan, also over a node or a note. It never selects or moves a node |
| Scroll, or pinch on a trackpad | Zoom in or out around the pointer, from 15% to 300%. ⌘ / Ctrl-scroll zooms too |
| Scroll over a dial | Step the playhead one frame for each click of the mouse wheel (⇧ / Shift: 10 frames). A pinch or ⌘ / Ctrl-scroll over a dial still zooms (Scrub to a time) |
| ⇧ / Shift-scroll | Pan. With a mouse wheel it pans sideways; on a trackpad it pans every way. A sideways swipe also pans |
| Double-click a comp | Go inside the comp. Click a name in the address bar at the top to go back out |
| Double-click empty graph | Fit the graph in the view |
| ⇧1 / Shift+1 with the pointer over the graph | Fit the graph in the view. The fit button at the bottom right does the same |
| → / ← | Select the next node toward the surface / toward the sources (after a click in the graph, not on the canvas). With several sources, ← picks the top one |
| ↑ / ↓ | Select the nearest node above / below, also in another branch. A node in the same column comes first. At the top and the bottom of the graph, it stops |
| Double-click a sticky note | Edit its text. Esc, ⌘⏎ / Ctrl+Enter or a click outside finishes (Notes) |
| ⏎ / Enter on a selected note | Edit the note |
| ⌫ / Backspace on a selected note | Delete the note (Delete works too). Esc deselects it |
| Right-click a note | The note menu: colour, edit, remove |
| Drag a note, or its corner | Move the note, or resize it |
| Drag across a clock dial | Move through time (scrub). Drag left or right: 240 px is one turn. It pauses playback. ⇧ / Shift moves 4× slower. On an audio or video dial, 480 px covers the whole clip |
| Click a dial's centre | Play or pause |
| Click the time on a clock dial | Show time in seconds or in frames, everywhere in the app |
| ‹ / › by the scene dial's centre | Step one frame. Hold to repeat. ⇧ / Shift steps 10 frames |
| Click a dial's cue band | Add a cue (a named moment) there, in a gap between cues |
| Drag a cue around the band | Move the cue |
| Drag a cue onto another clock dial | Add a trigger: that clock starts when this clock reaches the cue. The target must be a named clock, not the scene dial |
| Click a keyframe tick on a dial | Select the keyframe. Properties opens at that property |
| Drag a keyframe tick on a dial | Move the keyframe in time, between its neighbours |
| Drag a ◇ chip from Properties onto a dial | Animate that property on that clock |
| Drop a file or an Assets tile | Add it at the graph level you are on: images, video and audio (Drop a file or asset) |
Properties
Mouse and keys in the Properties panel. See Properties.
| Drag a field's label | Change the value by dragging (scrub): one step for each pixel. ⇧ / Shift is 10 times finer |
| ↑ / ↓ in a number field | Step the value up / down. ⇧ / Shift steps 10 times more |
| Type in a number field | The value changes as you type. ⏎ / Enter leaves the field |
| Middle-drag a number | The value ladder: drag up / down to pick the step, sideways to change the value. Esc puts it back |
| Click ◇ | Add a keyframe at the playhead. On a keyframe (◆), remove it. The last keyframe of a track stays |
| Drag ◇ onto a clock dial | Animate the property on that clock. Esc during the drag cancels |
| Right-click a row | Open the property menu |
| ⌘F / Ctrl+F over Properties | Filter the fields by name. The magnifier button in the title row does the same |
| ⏎ / Enter or Esc in the filter | ⏎ / Enter keeps the filter and hides the field. Esc clears the filter (not the panel) |
| + add effect…: ↓, ⏎ / Enter or Space | Open the effect picker |
| Type in the effect picker | Filter the effects. The arrows move around the grid. Home / End go to the first / last one |
| ⏎ / Enter in the effect picker | Add the effect. Esc or Tab closes the picker |
| Click the gradient bar | Add a colour stop |
| Drag a colour stop | Move it. Pull it off the bar to remove it. Esc during the drag cancels |
| Click a colour stop | Edit its colour |
| ← / → on a selected stop | Move the stop 1%. ⇧ / Shift moves it 10% |
| ⌫ / Backspace on a selected stop | Remove the stop (Delete works too). A gradient keeps at least 2 stops |
Timeline keys
These keys work while the pointer is over the timeline's layers view. They act on the selected layers, or else on the layer under the pointer. See Timeline keys.
| ⌥[ / Alt+[ / ⌥] / Alt+] | Set the in / out point (where the layer starts / ends) at the playhead. These are the After Effects trim keys |
| s | Split the layer in two at the playhead |
| d | Duplicate the layer in place |
| ⌘D / Ctrl+D | Duplicate the layer in place |
| ⌘C / Ctrl+C | Copy the layers |
| ⌘V / Ctrl+V | Paste the layers at the playhead |
| ← / → | Move the playhead one frame. ⇧ / Shift moves it 10 frames |
| ⌥← / Alt+←, ⌥→ / Alt+→ | Move the selected layers one frame, with their keys. Add ⇧ / Shift for 10 frames |
| ⌥⌘← / Alt+Ctrl+←, ⌥⌘→ / Alt+Ctrl+→ | Move only the in and out points of the selected layers one frame. The keys stay |
| ↑ / ↓ | Jump to the previous / next edit point: an in or out point, a marker, an end of the work area, or the start or end of the loop |
| + / − | Zoom time in / out around the playhead (= and _ work too). If the playhead is off screen, around the middle |
| 0 | Fit the whole loop (the 0 above the letters; the keypad's 0 is the RAM preview) |
| [ / ] | Set the start / end of the work area (the part that loops) at the playhead. i / o do the same from anywhere |
| n | Turn snapping on or off. Frames always snap. ⌘ (Mac) / Ctrl (Windows) during a drag changes it while you hold the key. ⌥ / Alt during a drag turns all snapping off |
| \ | Add a marker at the playhead |
| ⇧\ / Shift+\ | Add a layer marker on the selected video layers |
| Esc | Clear the selected keyframes, then the selected layers, then close the timeline |
Timeline mouse
Mouse actions in the timeline's layers view. Each layer has a bar in the track area, to the right of the names. The bar shows when the layer plays in the loop. See Timeline.
| Press or drag the ruler | Move through time (scrub). It pauses and snaps to frames |
| Scroll, or pinch, over the bars | Zoom time around the pointer. ⌘ / Ctrl-scroll zooms too |
| ⇧ / Shift-scroll | Pan through time. On a trackpad it also scrolls the rows. A sideways swipe also pans time |
| Scroll over the layer names | Scroll the rows |
| Scroll over the time in the header | Step the playhead one frame for each click of the mouse wheel. Add ⇧ / Shift for 10 frames (Scrub to a time) |
| Click a layer name | Select the layer. On a group row, select the group. ⇧ / Shift- or ⌘ / Ctrl-click a group row to add the group to the selection, or take it out |
| ⇧ / Shift-click a layer name | Select all the layers from the last one you clicked |
| ⌘ / Ctrl-click a layer name | Add the layer to the selection, or take it out |
| ⌘ / Ctrl-click a bar | Add the layer to the selection |
| ⇧ / Shift-click a bar | Add the layer to the selection, or take it out |
| Double-click a comp's name | Go inside the comp |
| Drag a layer name | Move the layer up or down the stack, or drop it into a group or transform |
| ▸ on a row | Open the layer to see its lanes (one row per animated property) |
| ↳ on a row | Go inside the comp that the layer uses |
| Drag the edge of a bar, top half | Trim: move the in or out point |
| Drag the edge of a bar, bottom half | Slip a video: change which part of the video plays, and keep the bar where it is. On other layers it trims |
| Drag a bar, top half | Copy: a ghost follows, and the drop makes a copy |
| Drag a bar, bottom half | Move the layer in time. A selection moves together. Other layers never move |
| ⌥ / Alt while dragging a bar | Switch between copy and move, and place it freely, between frames |
| ⌘ (Mac) / Ctrl (Windows) while dragging a bar, a keyframe, a marker or the work area | Change the snapping while you hold the key: off when it is on, on when it is off (Snap with ⌘ / Ctrl) |
| Right-click a bar › Move In/Out Only | The next drag of that bar moves only its in and out points. The keys stay. Esc cancels |
| c while dragging a bar | Switch between copy and move |
| Esc while dragging | Cancel the drag and put everything back. The timeline stays open, and the selection stays |
| Double-click a bar | Make the layer play for the whole loop again |
| Drag in an empty part of the track area | Drag a box to select the layers and keyframes it touches. ⇧ / Shift or ⌘ / Ctrl adds them. Hold the box at the top or bottom edge to scroll the rows |
| ⇧ / Shift-drag a bar | Start a selection box from the bar |
| Click an empty part of the track area | Clear the selected keyframes. With none, clear the selected layers |
| Right-click a bar, a keyframe, a lane, a marker, the ruler or an empty row | Open its menu (Menus) |
| eye switch | Bypass (turn off) the layer |
| fx switch | Bypass the layer's effects |
| solo switch | Show only this layer while you work. Export ignores it |
| lock switch | Lock the layer: canvas clicks pass through it, and the timeline will not edit it |
| Double-click the ruler | Add a marker there. ⌥ / Alt places it between frames |
| Drag a marker | Move the marker |
| Click a marker | Move the playhead to it |
| Double-click a marker | Give the marker a name. ⏎ / Enter or a click away keeps it; Esc cancels |
| A layer marker on a video bar | Drag it along the clip (⌘ / Ctrl: change the snapping; ⌥ / Alt: no snapping). Click it to move the playhead there. Double-click to name it. Right-click for its menu |
| ⚑ in the header | List the markers. Click one to go there. Its × removes it |
| snap in the header | Turn snapping on or off, like n |
| scope in the header | Pick what the timeline shows. With focus on it, ↑ / ↓ or ⏎ / Enter open its list |
| × in the header | Close the timeline |
| Drag the work-area band | Move one end of the work area, or all of it |
| Double-click the work-area band | Clear the work area: the whole loop plays |
| Click rows in the header | Make the rows taller or shorter: 22, 32 or 44 px |
| Drag the top edge of the timeline | Make the timeline taller or shorter |
Keyframes
Keyframes on a layer's lanes in the layers view. A keyframe is a value at a moment in time. Click ▸ to open the layer first. See Add, move, delete keys.
| Click a keyframe | Select it |
| ⇧ / Shift-click a keyframe | Add it to the selection, or take it out |
| Drag a keyframe | Move it in time. It snaps to frames (⌥ / Alt does not). A selection moves together |
| Double-click a lane | Add a keyframe there. On a keyframe, remove it |
| Double-click a keyframe | Open its curve in the curves view, with the keyframe selected |
| Right-click a keyframe | Ease, edit curve…, delete keyframe (Menus) |
| ◇ on a lane | Add a keyframe at the playhead, or remove the one there |
| ‹ / › on a lane | Jump to the previous / next keyframe |
| ∿ on a lane | Open the lane in the curves view (Open a lane's curve) |
| Type or ladder a lane's value | Add a keyframe at the playhead with that value. If a keyframe is already there, change it |
| ⌫ / Backspace | Delete the selected keyframes (Delete works too) |
| ← / → | Move the selected keyframes one frame. ⇧ / Shift moves them 10 frames |
| Esc | Clear the keyframe selection |
Curves view
The timeline's other view (⌥T / Alt+T). It shows one cycle of the selected layer's clock (the timer that plays its keyframes), with one lane for each curve. See Edit in the curves view and Curves and eases.
| Click a keyframe | Select it |
| ⇧ / Shift-click a keyframe | Add it to the selection, or take it out |
| Drag an empty part of a lane's graph | Drag a box to select that lane's keyframes. ⇧ / Shift adds them. A click clears the selection |
| Double-click an empty part of a lane's graph | Add a keyframe. Its value comes from the curve |
| Drag a keyframe | Move the selected keyframes in time and in value. Time snaps to frames (⌥ / Alt does not) |
| ⇧ / Shift while dragging a keyframe | Move only in time, or only in value: the way you moved most |
| Drag a handle | Change the shape of the curve next to the keyframe |
| ⌥ / Alt while dragging a handle | Move one handle alone, or both together (it switches unified / broken for this drag) |
| Esc while dragging | Cancel the drag |
| ← / → | Move the selected keyframes by 1% of the cycle. ⇧ / Shift moves them 5%. With the pointer over a clock dial, the arrows step one frame instead, and the keyframes stay |
| ⌫ / Backspace | Delete the selected keyframes (Delete works too). A lane keeps its last one |
| Esc | Close the timeline |
| Right-click a keyframe | Ease, delete keyframe (Menus) |
| Double-click the gate lane | Add a gate span (a stretch where the layer shows) |
| Drag a gate span, or its edges | Slide the span, or trim it. Right-click it to delete it |
| Right-click a cue line | Remove the cue |
| Press or drag the ruler | Move through time (scrub) |
| Scroll over a graph | Zoom time around the pointer, for all lanes |
| Scroll sideways, or ⇧ / Shift-scroll with a mouse | Move through time |
| ⌥ / Alt-scroll over a graph | Zoom that lane's values |
| ⇧ / Shift and scroll up or down on a trackpad | Move that lane's values up or down |
| Scroll over the lane names | Scroll the list of lanes |
| Drag the bottom edge of a lane | Make all lanes taller or shorter (48 to 480 px) |
| Drag the top edge of the panel | Make the panel taller or shorter |
Curves view tools
The tools at the right of the curves view's header. They work on the selected keyframes. See Curves and eases.
| t / v fields | Type the time in the cycle (1.5s, 45f, 250ms) or the value. ⏎ / Enter uses it. Esc leaves it unchanged |
| An ease button | Set the ease (the shape of the motion) after each selected keyframe (Set an ease) |
| The steps field | Set the number of steps for a steps(n) ease |
| unified / broken button | Switch the handles of a keyframe: unified keeps both on one line, broken lets each move alone |
| frame all | Fit the whole cycle and every curve |
| sel | Fit the time and the values to the selected keyframes |
| × | Close the timeline |
Stages
Keys in the Stage panel, the 3D room where you plan a shot. While the panel has the keys, the keys you press alone (with no ⌘ / Ctrl) are the stage's. The panel takes the keys when it opens, and again when you click inside it (not in a text field). Shortcuts with ⌘ / Ctrl still work. Click the canvas to use its keys, for example Space, g and s. See Stages.
| w | Move handles on the selected item. It slides on the ground |
| ⇧ / Shift while moving | Lift the item off the ground |
| e | Turn handles on the selected item |
| r | Size handles on the selected item |
| p | Pose mode on the selected figure: click a joint, then turn it. Press p again, or w, e or r, to leave pose mode |
| c | Switch between the camera view (through the lens) and the free view |
| f | Frame the selection. In the camera view, point the camera at it |
| x | Snap for moves. It starts at 0.1 m. Press x for 1 m, again for off, again for 0.1 m. While moves snap, turns snap to 15° |
| ← → ↑ ↓ | Move the selected item 0.1 m on the ground, in the direction you look. A locked item does not move |
| ⇧ / Shift + an arrow | Move it 1 m |
| ⌥ / Alt + an arrow | Move it 0.01 m |
| ⌫ / Backspace | Remove the selected item, not while it is locked (Delete works too) |
| Esc | Go back one step: pose mode, then the selection, then the camera view, then close the Stage panel |
| Click an item | Select it |
| Drag | Turn the view around (orbit). In the camera view, it moves the camera |
| Right-drag, or ⇧ / ⌘ / Ctrl-drag | Pan the view. In the camera view, it moves the camera |
| Scroll, or middle-drag | Move the view nearer or farther. In the camera view, it moves the camera |
| ⌥ / Alt-scroll over the frame | Change the lens, in the camera view |
| ⏎ / Enter in the lens (mm) field | Use the lens you typed. Esc puts the old value back (it does not close the panel) |
| Esc in a text field of the stage panel | Cancel the edit only |
| Double-click a body slider | Reset it to ×1 |
| ⇧1 / Shift+1 | Nothing in the panel. The status line says the canvas’s keys: click the canvas, then f to focus or ⇧1 to fit |
| b, ⇧M / Shift+M, v | Nothing in the panel. They stay in it, so they never change the canvas behind it. Click the canvas to use them |
Generations and preview
Keys in the Generations panel and the generation preview. See Generations and Preview an output.
| n in the Generations panel | Start a new generation |
| ↑ / ↓ in the Generations panel | Move through the jobs. An open preview follows. Focus must be in the panel |
| ⇧-click / Shift-click a job | Select every job from the last job you clicked to this one, as the list shows them |
| ⌘-click / Ctrl-click a job | Add the job to the selection, or take it out. On a Mac, Control-click does the same |
| ⇧↑ / ⇧↓ (Shift+arrows) | Make the range of selected jobs one job longer or shorter |
| Esc with several jobs selected | Go back to one job: the last one you clicked. With one job selected, Esc closes the panel |
| Click a finished job | Show its output large, over the canvas |
| Double-click a row or card | Put its reference into the Claude prompt (as mention in Claude does) |
| ⏎ / Enter on a job | Show its output. Press it again to close the preview |
| 1 to 6 | Grade the selected jobs or the output on show: circled, select, hold, soft, NG (no good), ref. The same key again clears it |
| 0 | Clear the grade |
| Click NG in the preview | Grade it NG. Starlight asks why. A key grade does not ask |
| ⌘Z / Ctrl+Z after a grade | Undo the grade |
| ← / → in the preview | Show the previous / next output in the panel's list. Over the timeline, the timeline's keys come first |
| Click a video in the preview | Pause or play it. Drag its scrub bar to move through it |
| Space in the preview | Play or pause the scene, as usual |
| Esc in the preview | Close the preview (not the panel) |
| ⌘⏎ / Ctrl+Enter in the New Generation form | Send the job |
| Esc in the New Generation form | Close an open input picker first. Then go back to the job list |
| Keys that edit the canvas | Nothing while the preview covers the canvas. ⇧1 / Shift+1 over the graph still fits the graph |
Glimpse
Keys in the Glimpse room. Click into the room first. See Look around the room.
| w a s d or the arrows | Walk, in walk mode. In orbit mode these keys do nothing |
| q / e | Go down / up, from 0.4 m to 3.2 m above the floor |
| ⇧ / Shift while walking | Walk faster: 4.5 m a second instead of 1.9 m |
| Drag | Look around (walk mode, any mouse button), or turn around the room (orbit mode) |
| Right-drag (orbit mode) | Pan the view. It stays inside the room |
| Scroll | Move forward or back (walk mode), or zoom (orbit mode) |
| Two-finger drag on a touch screen | Walk |
| Double-click the room | Go back to the starting view. This stops the tour |
| ▶ tour | Play the guest tour: a walk through the room, in a loop. The button shows only when the venue has a tour. While it plays, keys and drags do nothing |
| ■ tour, walk, orbit or a camera button | Stop the tour |
Claude panel
Keys in the Claude panel. While its terminal has focus, your typing goes to Claude, and most ⌘ / Ctrl shortcuts still work. See Keys in the terminal.
| ⌃` / Ctrl+` | Go to Claude from anywhere: open the panel, or put the keys in its prompt. From the terminal, close the panel. Claude keeps running |
| ⇧Esc / Shift+Esc | Leave the terminal. The panel stays open. A plain Esc goes to Claude |
| ⇧⏎ / Shift+Enter | Start a new line in your message instead of sending it |
| ⌘S / Ctrl+S, ⌥⌘S / Ctrl+Alt+S | Save the open scene, or save all scenes, also from the terminal. Claude never gets these keys |
| ⌘ keys (Mac) | Starlight's, also from the terminal, except ⌘C ⌘V ⌘X ⌘A. ⌃ + a letter goes to Claude |
| Ctrl+K, Ctrl+/, Ctrl+,, Ctrl+PageDown, Ctrl+PageUp, F11 (Windows) | Starlight's, also from the terminal. Every other Ctrl + letter goes to Claude |
| Click + | Start a new chat (or pick an earlier one to resume) |
| Click ↻ | Restart this chat: Claude starts again in this tab with the same conversation |
| Click a tab | Bring that chat to the front |
| × on a tab | Close that chat. Its session ends |
| Right-click the panel | Open the Claude menu |
| Right-click a tab | Open the tab menu: rename, restart or close that tab |
| Double-click a tab | Rename the tab. ⏎ / Enter or a click away keeps the name; Esc cancels |
| Drag a tab | Change the order of the tabs |
| Scroll over the tabs | Scroll the row of tabs |
| ⌘C / Ctrl+C | Copy the selected text. On Windows, with nothing selected, Ctrl+C stops Claude |
| ⌘V / Ctrl+V | Paste into the terminal |
| Ctrl+Shift+C / Ctrl+Shift+V (Windows) | Always copy / paste, never stop Claude |
| ⌃V (Mac) | Goes to Claude Code, which uses it to paste an image |
On Windows
Most keys are the same with Ctrl in place of ⌘. These are the places where Windows is different.
| Alt or F10 | Go to the menu bar. Press it again to leave. In the Claude terminal these keys go to Claude |
| In the menu bar | ← / → or Tab / Shift+Tab move. ⏎ / Enter, Space or ↓ opens a menu. A menu's letter opens it. Esc leaves |
| Alt+S, Alt+F, Alt+E, Alt+V, Alt+C, Alt+G, Alt+W, Alt+H | Open the Starlight, File, Edit, View, Scene, Gen, Window or Help menu (not in the Claude terminal). While you hold Alt, the letters are underlined |
| Ctrl+O | The Open dialog takes a project folder only, not a project.yaml file |
| Ctrl+Y | Redo (Edit › Redo). In a text field it redoes your typing; elsewhere it redoes the scene, like Ctrl+Shift+Z |
| Ctrl+W, Ctrl+M | Close or minimize the window. Closing asks Save changes? first when anything is unsaved (Alt+F4 too) |
| F11 | Full screen on or off |
| Ctrl while dragging | Change the snapping while you hold the key: a surface stops snapping, a layer snaps, and a timeline drag does the opposite of the snap button (⌘ on a Mac, Snap with ⌘ / Ctrl) |
| Ctrl-scroll on the canvas or graph | Zoom faster, as a trackpad pinch does |
| Ctrl+C in the Claude terminal | Copies the selected text. With nothing selected, it stops Claude |
| Ctrl+Shift+C / Ctrl+Shift+V in the Claude terminal | Always copy / paste |